The electrical panel is the hub for the power that flows through your home or building and brings it to life. Under most circumstances, an electrical panel functions flawlessly, safely distributing power throughout your electrical system. However, when the panel becomes overloaded with too many circuits, it can create a dangerous situation which can result in property damage, fire, or injury. If your panel becomes overloaded, there’s no doubt that you will need the help of electrical service contractors in Orlando, FL, to help restore it to safe working order.
When your electrical panel is conducting more power than it’s rated to handle, it can do damage to sensitive electronic devices and cost you hundreds or thousands of dollars to replace those items. It can also create a hazardous situation that can put your safety in jeopardy. Fortunately, there are a few telltale signs that can help you determine whether your panel is overloaded. If you suspect that your electrical panel is overloaded, contact an electrical contractor to inspect your system and make amendments if necessary. Read more here to learn about 5 of the most common signs that your electrical panel is overloaded.
If your power routinely cuts off without warning, it could be a sign that your panel is overloaded. It’s not abnormal for the breakers on your panel to flip from time to time. However, if breakers flip often, even when appliances have been shifted from one circuit to another, it may mean your panel is not rated highly enough to meet the power demand. Also, even if the breakers don’t flip, you may experience reduced power flow that causes issues such as dimming or flickering lights. If you experience any of these issues, have an electrician inspect your system.
If you notice that any of the components of the electrical system are overheating, that is a sign that the panel is overloaded. The breakers, wiring, or other components of the system aren’t supposed to feel hot to the touch. If they are glowing red or have melted through the wire insulation, that indicates a need for immediate attention from an electrician. If that is the case, it means that your panel needs immediate attention from a licensed electrical contractor.
Under normal circumstances, your electrical system should be almost silent. If you can hear sounds such as humming or buzzing emanating from the panel, wires, or breakers, you should have an inspection conducted as soon as possible. Those sounds can be a sign of an overloaded panel. A noisy electrical system could also be a sign of worn components, so it’s best to have a professional look your system over for damaged or worn parts.
When your electrical system sparks, it can be a sign that the current is arcing. Arcing happens when contacts are bad or when the insulation on your wiring is damaged somehow. Such circumstances warrant immediate attention since arcing and sparking can cause structure fires. If you see sparking from any portion of your electrical system, contact a licensed electrical contractor immediately.
Another sign that you could have problems with an overloaded panel is the presence of a burning odor around the panel or other electrical system components. You may also detect an unusual odor that you have a hard time describing, as arcing electricity can create ozone. Ozone has a clean smell that some people describe as chlorine-like, and it can be detected by the human sense of smell when electrical arcing has occurred. If you smell anything unusual around your electrical panel, make sure a licensed electrical contractor inspects the system for safety.
If you experience any of these common signs of an overloaded panel, don’t wait to have the system inspected and repaired. To have an experienced electrical contractor look at your electrical panel, contact In Phaze Electric at (407) 599-7777.