SERVICES16
SERVICE AREAS15
Pool, spa and hot tub electrical
Dedicated circuits and GFCI disconnects for hot tubs and swim spas, pool equipment circuit repairs, and bonding checks. Water and electricity have their own section of the code, and we follow it to the letter.
That range is a typical hot tub or swim spa hookup: a dedicated 240-volt circuit and a GFCI disconnect. Short runs from a panel with room are the low end; long or underground runs and panels without space are the top. Pool equipment circuit repairs are diagnosed at our service rate and priced before we fix them.
What we get called for
If two or more of these describe your house, it is worth a free estimate. If none of them do, you probably do not need us yet — and we would rather tell you that now.
What kind of tub are you powering?
The tub's spec sheet decides the circuit. Here is the usual range.
Plug-and-play spa
20 A dedicated GFCI outlet
Smaller tubs rated for a standard plug. Needs its own GFCI circuit, never an extension cord. Heats slowly.
Standard hot tub
40–60 A GFCI disconnect
Most hot tubs. Heats and runs jets at the same time, with a GFCI disconnect within sight.
Swim spa
Spec sheet sometimes two circuits
Bigger pumps and heaters. Some need more than one circuit; a load calculation comes first.
Equipment we install
Listed for wet locations and matched to your panel.
5 things set your price.
40, 50 or 60 amps, from the tub's spec sheet.
The biggest driver after the circuit size.
Trenching and underground conduit cost more than a wall run.
A full panel may need a rework or tandem room made first.
Included in our price.
Real numbers.
Not "call for pricing."
Nobody else in this market publishes ranges, which is exactly why we do. You will get an exact number at the estimate — this is so you know whether to bother calling.
We price match a current written quote or receipt from another licensed contractor. Military, first responders and teachers get 5% off when they book — just say so, no coupon to find.
Before your hot tub or pool visit.
The spec sheet answers half our questions.
Amps and voltage, usually in the manual or online.
And whether the pad is poured.
Door open, labels visible.
For pool equipment: what trips and when.
So the circuit is ready when the tub arrives.
How a hot tub hookup goes
Most people's worry is not the price, it is not knowing what is about to happen in their house. So here it is.
Real reviews, word for word.
"Talking with anyone I mean anyone at this company is like talking with a best friend."
"They come in and let you know what needs to be done. There was no added extras or scare tactics."
"I was impressed with his manners (he took his shoes off at the door)… He was persistent and patient in locating the problem."
"Modesto was exceptional electrician, very polite, friendly and respectful to my house."
Pools at HOAs, hotels and rentals
Community pools, short-term rental pools and spas, and equipment rooms: circuits, timers and bonding corrections after inspection, scheduled around open hours.
We handle it. You handle nothing.
New hot tub and spa circuits, pool equipment circuits and bonding work are permitted and inspected in every Central Florida jurisdiction. Our office files the permit and meets the inspector.
It surfaces at resale, in an insurance claim, and in an inspection you did not schedule.
If a bid is dramatically under ours, ask whether the permit is included. Usually that is the difference.
Filed, scheduled, and met. Customers thank our office by name in reviews for exactly this.
Straight answers.
What size circuit does a hot tub need?
Most 240-volt hot tubs need a 40, 50 or 60 amp circuit; swim spas can need more. The tub's spec sheet decides it, and we size the wire and breaker to match.
Does a hot tub need a disconnect?
Yes. Code requires a disconnect within sight of the tub and at least 5 feet away from the water's edge, and the circuit must be GFCI protected. A GFCI disconnect handles both.
Can I plug in a 120-volt plug-and-play spa?
If it is rated for it, it needs its own GFCI-protected outlet on a dedicated circuit, not a shared patio outlet or an extension cord. Many people later convert to 240 volts so it heats faster.
What is pool bonding?
Connecting the pool steel, rails, pump, ladders and nearby metal together so they sit at the same voltage. It is what keeps the water from shocking you. Missing or broken bonding shows up on inspections and should be fixed.
I felt a tingle in the pool. What should I do?
Get everyone out, turn off the pool equipment breakers, and call. Do not swim until it is tested.
Do you install pool pumps or heaters?
We do the electrical side: circuits, disconnects, timers and bonding. The pool company sets the equipment itself.
What is the warranty?
One year on our parts and labor.
Pool, spa & hot tub across Central Florida
Get a straight answer before you get a bill.
Free estimate. If you do not need the work, we will tell you — that is the whole reason people come back to us.