★★★★★ 4.8 2005 REVIEWS
BOOK ONLINE CALL
TIER 4 · SERVICE × CITY /aluminum-wiring-longwood │
ALL 8 ROUTES ▾
ALUMINUM WIRING LONGWOOD ALUMINUM WIRING WINTER SPRINGS CLOTH WIRING SANFORD CLOTH WIRING WINTER PARK EV CHARGER LAKE MARY GENERATOR KISSIMMEE PANEL REPLACEMENT ORLANDO WHOLE HOME REWIRE WINTER PARK
SEMINOLE COUNTY · DUKE ENERGY ACROSS MOST OF LONGWOOD · PERMITTED

Aluminum wiring repair in Longwood, FL

Sweetwater Oaks and Wekiva are exactly the right vintage for aluminum branch wiring, and they are also where we find the most 1970s panels worth replacing on sight.

LONGWOOD · TYPICAL INVESTMENT
$1,800 – $9,500

Remediation at every device — the approach most carriers accept — is far cheaper than a full rewire. The range depends on device count, not square footage. We count them at the estimate.

REVIEWS FROM LONGWOOD101
PERMIT OFFICECity of Longwood Building Division, or Seminole County outside city limits
WHO COVERS ITGrant and Jason cover Seminole County.
WHY THIS PAGE EXISTS

Four things that are only true in Longwood.

If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.

01

Two problems in the same house

The homes with aluminum branch wiring out here often have a Federal Pacific or Zinsco panel as well. Fixing the terminations and leaving that panel is half a job — we will show you what is in yours.

02

Well pumps change the priority

A lot of Longwood is on wells. A loose aluminum termination on the pump circuit does not just flicker a light, it costs you water. Those circuits get looked at first.

03

Longwood or Seminole County

City of Longwood Building Division inside the limits, Seminole County outside. Duke Energy serves both. We file to the right one so it does not sit in a queue for a week.

04

Historic Longwood is different

The older core predates aluminum entirely — there you are looking at cloth wiring instead. We check which you actually have before quoting either.

LONGWOOD PRICING

Real numbers before you call.

Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.

Device-level remediation
$1,800 – $3,600
Approved connectors at every receptacle, switch and fixture. Most carriers accept this.
Remediation plus panel work
$3,600 – $6,000
Terminations corrected at the panel too, plus a documented report for your carrier.
Full branch-circuit replacement
$6,000 – $9,500
Copper home runs replacing aluminum throughout. The permanent answer.
NO SURPRISES

How it goes

Grant and Jason cover Seminole County. You will have a name and a text before anyone is at your door.

Estimate
We open two or three devices to confirm it really is aluminum, and count the devices.
Plan
We tell you which option your insurance is likely to accept before you spend anything.
Day 1
Device-by-device remediation with listed connectors, torqued and inspected as we go.
Day 1–2
Panel terminations corrected, anti-oxidant applied where specified.
Close
Inspection, then a written summary with photos you can hand to your carrier.
VERIFIED CUSTOMER REVIEWS

Real reviews, word for word.

ALL 2005 REVIEWS →
★★★★★
ANGI

"Grant wired our new kitchen project. We have used him two other times and plan on using him with our next project."

KARLA B. · KITCHEN WIRING · OCT 2025
★★★★★
HOMEADVISOR

"…In Phaze sent 3 people for the job, which they completed in 1 day, even vacuuming up afterwards."

HOYT E. · WIRING UPGRADE · APR 2024
★★★★★
HOMEADVISOR

"After getting the run around from other electricians I came across In Phase. Wish I found them first."

MARK B. · SERVICE UPGRADE · FEB 2025
★★★★★
HOMEADVISOR

"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."

RYAN D. · PANEL UPGRADE · MAR 2026
QUESTIONS WE GET IN LONGWOOD

Straight answers.

Is aluminum wiring actually dangerous?

The wire itself is not the problem. Aluminum expands and contracts more than copper, so terminations loosen over decades and loose terminations overheat. Fix the connections properly and the risk drops dramatically.

Do I have to rewire the whole house?

Usually no. Remediation at every device is the standard fix and costs a fraction of a rewire. We lead with that answer because it is the honest one.

Will this satisfy my insurance company?

Most Florida carriers accept documented remediation with listed connectors. We give you photos and a written summary. Confirm the specific requirement with your agent first — they vary.

How do I know if I have it?

Pull a receptacle cover and look, or have us do it during a free estimate. The wire is silver rather than copper-colored and often stamped AL.

How long does remediation take?

One to two days for most homes, depending on device count. You keep power in most of the house most of the time.

Can you do it during a real estate closing?

Regularly. Tell us the deadline up front and we will tell you honestly whether we can hit it.

SHIPS WITH FAQPage + Service + LocalBusiness SCHEMA · TARGETS ALUMINUM WIRING LONGWOOD FL · FEDERAL PACIFIC PANEL LONGWOOD · ALUMINUM WIRING REPAIR SEMINOLE COUNTY
★★★★★
Rated by 2005.
Earned one job
at a time.

Aluminum wiring in Longwood, done right.

Free estimate. If you do not need the work, we will tell you — which is why people in Longwood call us back years later.

★★★★★ ALUMINUM WIRING · LONGWOOD · FREE ESTIMATES
BOOK ONLINE CALL