SERVICES16
SERVICE AREAS15
LED Lighting Installation in Winter Park, FL
Many Winter Park ceilings are plaster and lath, not drywall. That changes how we cut for a can light, where we put it, and how the patch is finished.
Per-fixture pricing drops sharply with quantity. A twelve-can living room costs far less per light than one can added to a finished ceiling later — batch what you can.
Four things that are only true in Winter Park.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
Plaster ceilings need a different cut
Plaster and lath cracks if you treat it like drywall. We cut slower, support the lath around each opening, and plan the layout to avoid extra holes. Patching plaster is part of the estimate, not a surprise at the end.
Cloth wiring at the ceiling
Homes in the historic district from the 1920s to 40s often have cloth-insulated wiring, knob-and-tube remnants and no ground. Hanging a new fixture on that is not always the right move. We look at the box and the wire first and tell you what we find.
Fixtures that need real support
Heavy chandeliers and pendants are common in the newer lakefront rebuilds. A heavy fixture needs a box and bracing rated for its weight, not just the ceiling. We check the weight and set the support before the fixture goes up.
Permits through the city
Swapping a fixture on an existing circuit generally needs no permit. Adding a circuit for new lighting does, and our office files it with City of Winter Park Building & Permitting Services.
Real numbers before you call.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
How it goes
Mike is in Winter Park most Tuesdays. You will have a name and a text before anyone is at your door.
Real reviews, word for word.
"Grant wired our new kitchen project. We have used him two other times and plan on using him with our next project."
"…In Phaze sent 3 people for the job, which they completed in 1 day, even vacuuming up afterwards."
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
Straight answers.
How many can lights do I need?
Depends on ceiling height, room size and what the room is for. We lay it out on the ceiling first so you see it before it is permanent.
Why do my LEDs flicker?
Almost always a dimmer that does not match the driver. It is a cheap fix and we carry the right dimmers.
Can you add lights without tearing up the ceiling?
Usually yes — remodel housings are made for finished ceilings. We cut once, in the right place.
Is under-cabinet lighting worth it?
It is the highest-impact lighting per dollar in a kitchen. Hardwired strips with a concealed driver look built-in; the stick-on kind does not.
Do you patch the drywall?
Yes. Patch and texture included on our lighting work.
What color temperature should I pick?
2700K–3000K for living spaces, 3500K–4000K for kitchens, garages and work areas. We bring samples rather than guess.
Earned one job
at a time.
LED lighting in Winter Park, done right.
Free estimate. If you do not need the work, we will tell you — which is why people in Winter Park call us back years later.