SERVICES16
SERVICE AREAS15
LED Lighting Installation in Orlando, FL
In a College Park bungalow, new can lights start with what is already in the ceiling. In Lake Nona or Baldwin Park, they start with a layout and a clean ceiling to cut.
Per-fixture pricing drops sharply with quantity. A twelve-can living room costs far less per light than one can added to a finished ceiling later — batch what you can.
Four things that are only true in Orlando.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
Old fixture boxes in the older ring
College Park and Delaney Park houses from the 1920s to 40s can still have cloth-insulated wire at the ceiling box. Heat from decades of bulbs makes that insulation brittle. We look at it when we take the old fixture down, and tell you if the box needs more than a new light.
Aluminum wire in Conway and Pine Hills
Some 1960s and 70s ranches here have aluminum branch wiring. A fixture or switch on an aluminum circuit needs connectors rated for it, not a standard wire nut. We check the wire before we connect anything.
Newer homes: layout is the job
Baldwin Park and Lake Nona houses usually have sound wiring and a builder-basic lighting plan. That makes them good candidates for a batch of recessed cans or under-cabinet lighting. We mark the cans on the ceiling before we cut, so you see the spacing first.
Who files the permit
A fixture swap on an existing circuit generally needs no permit. A new lighting circuit does, and our office files it with City of Orlando Permitting Services or Orange County Building Safety, depending on which side of the city line you are on.
Real numbers before you call.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
How it goes
Grant and Victor cover most of the city core. You will have a name and a text before anyone is at your door.
Real reviews, word for word.
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
"Our old panel dated back to 1984 and was overdue for replacement. We worked directly with Keylin, who was outstanding from start to finish."
"…tried to over charge for work that was not even necessary. In Phaze offered an alternative option at a fraction of the cost."
Straight answers.
How many can lights do I need?
Depends on ceiling height, room size and what the room is for. We lay it out on the ceiling first so you see it before it is permanent.
Why do my LEDs flicker?
Almost always a dimmer that does not match the driver. It is a cheap fix and we carry the right dimmers.
Can you add lights without tearing up the ceiling?
Usually yes — remodel housings are made for finished ceilings. We cut once, in the right place.
Is under-cabinet lighting worth it?
It is the highest-impact lighting per dollar in a kitchen. Hardwired strips with a concealed driver look built-in; the stick-on kind does not.
Do you patch the drywall?
Yes. Patch and texture included on our lighting work.
What color temperature should I pick?
2700K–3000K for living spaces, 3500K–4000K for kitchens, garages and work areas. We bring samples rather than guess.
Earned one job
at a time.
LED lighting in Orlando, done right.
Free estimate. If you do not need the work, we will tell you — which is why people in Orlando call us back years later.