St. Cloud fan calls range from century-old downtown houses to subdivisions built last year, with barns and manufactured homes in between. Each one mounts a little differently.
Installation only; you supply the fan. $277 for the first fan on an existing fan-rated box, about $180 for each additional fan on the same visit. A light-only box has to be replaced with a fan-rated one first; remotes and wall controls are extra.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
New homes south and east of town are often finished with light fixtures where you want fans. Where only a light was, the first fan is about $450 including the fan-rated brace box.
Older homes downtown can have minimal grounding and original wiring at the ceiling. We check the box and the wire before a fan with a metal body goes up.
Manufactured homes have different ceiling construction, so we confirm how the box is supported before hanging a fan. If it is not solid, we fix that first.
On rural properties, a fan in a barn or workshop may need a new box and switch run a long way from the house. That part is quoted at the estimate, and permits go through St. Cloud or Osceola County when required.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
Keylin covers south Osceola. You will have a name and a text before anyone is at your door.
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
"Our old panel dated back to 1984 and was overdue for replacement. We worked directly with Keylin, who was outstanding from start to finish."
"…tried to over charge for work that was not even necessary. In Phaze offered an alternative option at a fraction of the cost."
No. Our price is the installation; you buy the fan you like and have it on site. The fan-rated box, remote or wall control are parts we supply and are priced on the estimate.
Usually, but the box has to be rated for a fan. Most light boxes are not, and a fan on the wrong box works loose over time. We swap it for a fan-rated brace box first.
We cut in a fan-rated box and run power from a nearby switch or circuit, then patch what we open. That is quoted at the estimate because access varies.
Yes, with two wires to a dual switch, a wall control or a remote. If there is only one switched wire, a remote is usually the cleanest answer.
Yes. We size the downrod and use a sloped-ceiling adapter where needed. Very tall ceilings may need a taller ladder or lift, which we price up front.
Yes. Use a damp- or wet-rated fan outdoors; indoor fans rust and fail quickly in Florida humidity.
Free estimate. If you do not need the work, we will tell you — which is why people in St. Cloud call us back years later.