Winter Park's lakefront rebuilds ask for landscape and dock lighting at real scale. The historic bungalows a few streets back often have one tired porch light and an outdoor outlet that predates grounding.
A starter set with a transformer, a timer and a handful of fixtures sits at the low end. A full yard with several zones, long underground runs and dock or pool-deck lighting is the top. Single fixtures and floods are priced per light.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
Lighting near water has its own GFCI and distance rules, and dock fixtures have to be rated for wet locations. We light the steps and the edge of the dock and aim down, so the light stays on the boards and off the water.
Many historic-district homes still have cloth wiring and no grounding. The outdoor outlet a transformer would plug into may be ungrounded and unprotected. We replace it with a weatherproof GFCI outlet or run a new circuit, rather than plug a whole yard into it.
Low path lights in the beds are a different thing from new fixtures on a historic house front. If your home is in the historic district, ask City of Winter Park Building & Permitting Services about exterior fixture changes before anything is ordered. We can help you describe the work.
Big oaks and palms are what most Winter Park yards want lit. Cable near old roots is laid shallow and by hand, not trenched through them. We set the aim at the dusk check, when you can see what the light is actually hitting.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
Mike is in Winter Park most Tuesdays. You will have a name and a text before anyone is at your door.
"Grant wired our new kitchen project. We have used him two other times and plan on using him with our next project."
"…In Phaze sent 3 people for the job, which they completed in 1 day, even vacuuming up afterwards."
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
Most path and accent lighting is low-voltage: a transformer plugs into a GFCI outlet and safer 12-volt wire runs to the fixtures. Security floods and soffit lights are usually line-voltage. Many yards use both, and we wire each the right way.
Low-voltage cable is buried shallow along beds. Line-voltage runs go in conduit at the depth code requires. Either way nothing is left lying on the grass.
Yes. A photocell turns them on at dusk, a timer turns them off when you choose, and an astronomic or smart timer follows sunset through the year.
Fixtures, connectors and boxes must be rated for wet locations, and every outdoor outlet needs GFCI protection. Most landscape lights that fail early used indoor-grade connectors.
Often. Dead runs are usually a corroded splice, a failed transformer or a tripped GFCI. We find it at our service rate and tell you whether a repair or a new system makes more sense.
Yes. Lighting near water has extra code rules on GFCI protection and distance, and we follow them. Pool and spa circuits themselves are covered on our pool and hot tub page.
Free estimate. If you do not need the work, we will tell you — which is why people in Winter Park call us back years later.