SERVICES16
SERVICE AREAS15
Outlet Replacement in Longwood, FL
Longwood outlet calls range from ungrounded outlets in the historic core to exterior outlets at the end of a long run to a gate, shed or pool on a bigger lot.
Per-device pricing drops steeply with count. A whole-house refresh is far cheaper per outlet than a single service call, and there is one trip charge instead of six.
Four things that are only true in Longwood.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
Historic Longwood
Some of the oldest homes in Seminole County are here, and their outlets are often two-prong on circuits with no ground. We test each one and quote GFCI protection with the proper label, or a new grounded circuit where you need a true ground.
Exterior outlets on big lots
Long runs out to sheds, gates and pools often end at an outlet that has been rained on for years. We replace these with weather-resistant GFCI devices and in-use covers, and check the box for water.
Sweetwater Oaks and Wekiva
These 1970s and 80s homes often have original outlets that no longer grip a plug. If we see signs of heat at a device, we check the circuit and tell you if the panel is part of the story.
Like-for-like or permitted work
Swapping a device generally does not need a permit. A new outlet or circuit extension may. Our office files with the City of Longwood Building Division or Seminole County, whichever applies to your address.
Real numbers before you call.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
How it goes
Grant and Jason cover Seminole County. You will have a name and a text before anyone is at your door.
Real reviews, word for word.
"Grant wired our new kitchen project. We have used him two other times and plan on using him with our next project."
"…In Phaze sent 3 people for the job, which they completed in 1 day, even vacuuming up afterwards."
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
Straight answers.
Can I just replace outlets myself?
People do, and a fair share of our repair calls are fixing the results — reversed polarity, a bootleg ground jumper, a backstab connection that failed. It is cheap work for us to do right.
What is a bootleg ground?
Jumping neutral to ground inside the box so a tester shows "grounded." It passes a cheap tester and it is genuinely dangerous. We find these constantly in Central Florida.
Do two-prong outlets have to be replaced?
Not legally, but they cannot safely serve modern electronics. Where there is no ground, GFCI protection with the correct label is the code-compliant path short of a rewire.
Where does code require GFCI?
Kitchens, bathrooms, garages, unfinished basements, exterior, laundry areas and anywhere near a pool or spa. If yours are missing, that is worth fixing.
Is it cheaper to do the whole house at once?
Considerably. One trip, one setup, volume pricing per device. Doing them one at a time as they fail is the expensive way.
Can you add USB or smart outlets?
Yes. Worth noting USB modules age faster than the outlet does — we will tell you where they make sense.
Earned one job
at a time.
Receptacle replacement in Longwood, done right.
Free estimate. If you do not need the work, we will tell you — which is why people in Longwood call us back years later.