SERVICES16
SERVICE AREAS15
Outlet Replacement in Orlando, FL
In College Park, Delaney Park and Conway, outlet work is mostly about what is behind the plate: no ground, worn contacts, or aluminum wire. In Baldwin Park and Lake Nona it is usually adding outlets and GFCI where the builder stopped.
Per-device pricing drops steeply with count. A whole-house refresh is far cheaper per outlet than a single service call, and there is one trip charge instead of six.
Four things that are only true in Orlando.
If you could swap the city name out of this page and it would still be accurate, it should not exist. Here is what actually changes here.
Two-prong outlets in the older ring
Many 1920s to 40s bungalows near downtown still have two-prong outlets on circuits with no ground wire. Swapping in a three-prong device does not make it grounded. Where there is no ground, we install GFCI protection with the proper label or quote a new grounded circuit, and tell you which rooms need which.
Aluminum circuits in Conway and Pine Hills
1960s and 70s ranches here often have aluminum branch wiring. A standard outlet on aluminum is a known overheating point. We use devices rated for aluminum or pigtail to copper with connectors listed for the job.
Newer homes, missing outlets
Baldwin Park and Lake Nona houses usually have sound devices but not enough of them where people now need them: a garage workbench, a patio, a kitchen island. A new outlet where none exists runs $180 to $350 with the drywall patched.
Condos and lofts downtown
In a downtown condo we need to know where your panel is and how to reach it before we come out, so we can kill the right circuit and test every device. Like-for-like swaps generally need no permit. New outlets go through City of Orlando Permitting Services or Orange County, and our office files it.
Real numbers before you call.
Same ranges we publish everywhere, because the work does not cost more just because of the zip code. You get an exact number at the free estimate.
How it goes
Grant and Victor cover most of the city core. You will have a name and a text before anyone is at your door.
Real reviews, word for word.
"After getting the run around from other electricians I came across In Phase. Wish I found them first."
"Unlike some of their competitors, they don't try to up-sell products that aren't strictly necessary."
"Our old panel dated back to 1984 and was overdue for replacement. We worked directly with Keylin, who was outstanding from start to finish."
"…tried to over charge for work that was not even necessary. In Phaze offered an alternative option at a fraction of the cost."
Straight answers.
Can I just replace outlets myself?
People do, and a fair share of our repair calls are fixing the results — reversed polarity, a bootleg ground jumper, a backstab connection that failed. It is cheap work for us to do right.
What is a bootleg ground?
Jumping neutral to ground inside the box so a tester shows "grounded." It passes a cheap tester and it is genuinely dangerous. We find these constantly in Central Florida.
Do two-prong outlets have to be replaced?
Not legally, but they cannot safely serve modern electronics. Where there is no ground, GFCI protection with the correct label is the code-compliant path short of a rewire.
Where does code require GFCI?
Kitchens, bathrooms, garages, unfinished basements, exterior, laundry areas and anywhere near a pool or spa. If yours are missing, that is worth fixing.
Is it cheaper to do the whole house at once?
Considerably. One trip, one setup, volume pricing per device. Doing them one at a time as they fail is the expensive way.
Can you add USB or smart outlets?
Yes. Worth noting USB modules age faster than the outlet does — we will tell you where they make sense.
Earned one job
at a time.
Receptacle replacement in Orlando, done right.
Free estimate. If you do not need the work, we will tell you — which is why people in Orlando call us back years later.