HOME STANDBY · INSTALLED IN ORLANDO Briggs & Stratton home standby (PowerProtect) runs 13 to 26 kW on Vanguard-derived engines and carries a 7-year comprehensive warranty, the longest in the class. Symphony II load management lets a smaller unit run more of the house. The same company also makes the portable generators many Florida families already own.
| MODEL | OUTPUT | FITS |
|---|---|---|
| PowerProtect 13 kW | 13 kW | Essentials plus one AC |
| PowerProtect 18 kW | 18 kW | Most single-AC homes |
| PowerProtect 22 kW | 22 kW | Whole-home with load management |
| PowerProtect 26 kW | 26 kW | Whole-home, two AC systems |
| Portables 3,500–12,000 W | Gas or dual-fuel | Inlet box and interlock hookup |
Installed pricing tracks Generac closely; the warranty is the reason to choose it. Ranges include the transfer switch, pad, electrical and gas permits and a standard fuel run. The in-person estimate is free.
Inlet box, breaker interlock kit, dedicated circuit, permit. Uses the generator you already own.
AC, fridge, well, key outlets and lights. Transfer switch and pad included.
Full automatic transfer. Multiple AC systems, long fuel or feeder runs, subpanel work.
Price match against any licensed contractor's live quote · 5% off for military, first responders and teachers · 1-year parts and labor warranty on our work, on top of Briggs & Stratton's.
| SIZE | RUNS |
|---|---|
| 7.5 – 10 kW | Essentials: fridge, lights, fans, Wi-Fi, a well pump, one window unitPortable-plus-interlock territory, or the smallest standby units. |
| 13 – 14 kW | Essentials plus one 2–3 ton central AC with a soft-start or load-shed moduleThe most common “essential circuits” standby in Orlando. |
| 18 – 20 kW | Most of a 2,000–2,800 sq ft home with one 3.5–4 ton ACWhole-home for many single-AC houses. |
| 22 – 26 kW | Whole home with two AC systems, pool pump, electric range or dryerNeeds a 200 A service-rated transfer switch and often load management. |
Yes. We are a licensed Florida electrical contractor (ER13014254) and we install, wire, permit and commission Briggs & Stratton home standby generators and transfer switches across Orange, Seminole, Osceola and Lake counties. We size on your real load first, then recommend the unit.
Plan on $6,500–$9,500 for an essential-circuits standby (10–14 kW) and $9,500–$18,000 for whole-home (18–26 kW), including the transfer switch, pad, electrical and gas permits and a standard fuel run. Installed pricing tracks Generac closely; the warranty is the reason to choose it. The estimate is free and in person.
Essentials (fridge, lights, Wi-Fi, a well) fit in 7.5–10 kW. Add one central AC and you are at 13–14 kW. Whole-home with two AC systems is 22–26 kW. We run a load calculation on site instead of guessing from square footage.
On a level pad outside, with the manufacturer's clearances — typically 18 inches from the house, 5 feet from any window, door or vent, and clear of the AC condenser and gas meter. Orlando-area HOAs often want it screened and on the side yard; we handle the approval paperwork with you.
Yes, and it is the cheapest safe option. We add an outdoor inlet box, a listed interlock kit on your panel and a dedicated circuit, then permit and inspect it. $1,200–$2,400 depending on the panel and the run.
Inland, no. Within a few miles of the coast, aluminum (Generac, Kohler) ages better. We will tell you which at the estimate.